充氣拱門在現代生活中被越來越多的使用，不僅可以迎合氣氛，在廣告宣傳中也發揮了重要的作用，帶來了巨大的廣告效益，是開業慶典、博覽會等活動的好選擇。那么，充氣拱門是如何安裝的呢？
山東三所新材料戶外用具廠家教大家充氣拱門怎樣安裝。
Inflatable arches are increasingly used in modern life, not only to cater to the atmosphere, but also play an important role in advertising and promotion, bringing huge advertising benefits. They are a good choice for opening celebrations, expos, and other activities. So, how is the inflatable arch installed? Shandong Three New Materials Professional Outdoor Appliance Factory teaches everyone how to install inflatable arches.
使用拱門時一定要注意天氣，如果風太大，很容易被風吹倒，所以安裝充氣拱門時一定要固定繩索，應該多放些沙袋。打開拱門時，需要先將展開的拱門放在地上，然后將繩扣固定在拱門前面，然后將繩扣固定在后面，以防風吹走。
When using an arch, be sure to pay attention to the weather. If the wind is too strong, it is easy to be blown down by the wind. Therefore, when installing an inflatable arch, be sure to fix the rope and put more sandbags. When opening the arch, it is necessary to first place the unfolded arch on the ground, then fix the rope buckle in front of the arch, and then fix the rope buckle in the back to prevent the wind from blowing away.
吹氣前注意拱門，記得把沙袋放在拱門的兩個錨里，目的是避免錨的移動。當所有的準備好的的時候，可以打開風扇開關來打開空氣模型，并且需要調整位置，如果發現足弓不穩定，也可以調整它，用前后繩扣上的繩子來固定充氣拱門。
Before blowing, pay attention to the arch and remember to place the sandbag in the two anchors of the arch to avoid anchor movement. When everything is ready, you can turn on the fan switch to turn on the air model and adjust the position. If you find that the arch is unstable, you can also adjust it and use the ropes on the front and rear rope buckles to fix the inflatable arch.
在使用風扇的時候，要需要修理風扇的電源線，確保風扇不能漏電，并且注意風扇在使用時的安全問題，注意不要把電線和插座放在行人拉電線時經常走的地方。
When using a fan, it is necessary to repair the power cord of the fan to ensure that there is no leakage, and pay attention to the safety issues of the fan during use. Be careful not to place the wires and sockets in areas where pedestrians often walk when pulling wires.
另外，充氣拱門使用后，我們在折疊包裝充氣拱門的時候需要注意：測量放置充氣拱門位置的清潔程度和大小，確保其安全，并確保風扇放置穩定。電氣連接器應適當防潮，以避免不可預知的后果，并允許其緩慢下降。
In addition, after using the inflatable arch, when folding and packaging the inflatable arch, we need to pay attention to: measure the cleanliness and size of the position where the inflatable arch is placed to ensure its safety, and ensure that the fan is placed stably. Electrical connectors should be properly moisture-proof to avoid unpredictable consequences and allow for slow descent.
Do not place the fan in an unstable or descending shape. Before turning on the power, please stabilize the power and do not use it temporarily. Cut off the power supply of the fan first to prevent electric leakage and power outage from harming oneself or pedestrians. Come to our website for more usage details http://www.jd-sj.com Consult!
山東三所新材料技術有限公司
掃碼微信聯系
分類中心